Admixtures for Ready Mixed Concrete

Plastocrete®-901

Water -Reducing and Retarding Concrete Admixturebased on Special Organic Agents. Complies with ASTM. C-494 type D.

USE
Plastocrete® -901 is used where high quality concrete is required in difficult conditions such as:

  • Hot climate
  • Long hauls
  • Ready mix concrete
  • For wherever high quality dense concrete is required

CHARACTERISTICS AND ADVANTAGES

  • Increased setting times at elevated temperatures
  • Longlasting control of slump loss
  • Improved workability without increased water content
  • Reduced water without loss of workability
  • Increased strengths
  • Reduced shrinkage and creep
  • Improved surface finish
  • Chloride free does not attack reinforcement

COLOR
Brown
PACKAGING
200 litre
1000 litre

Product Data Sheet Plastocrete-901

Material Safety Data Sheet Plastocrete-901

Plastocrete®-903

Water -Reducing and Set -Retarding Concrete Admixture based on Refined Lignosulfonate, Carboxylicacid and Additives. Complies with ASTM C-494 type D & G.

USE
Plastocrete® -903 is used for:
As set-retarding concrete admixture where high quality is required at difficult conditions, especially at high ambient temperatures
Extend the peroid of time when fresh concrete can be placed and compacted
It is most suitable for ready-mixed concrete with PFA content of 0-30% on cement.

CHARACTERISTICS AND ADVANTAGES

  • Extended setting times at elevated temperatures
  • Long lasting control of slump loss
  • Improved workability without increased water content
  • Reduced water without loss of workability
  • Increased strengths with less cement
  • Reduced shrinkage and creep
  • Improved surface finish
  • Chloride free does not attack reinforcement

COLOR
Brown
PACKAGING
200 litre
1000 litre

Product Data Sheet Plastocrete-903

Material Safety Data Sheet Plastocrete-903

This is a text block. Click the edit button to change this text..

Plastocrete®-905

Mid-Range Water Reducing Concrete Admixture based on Synthetic Polymer and Modified Lignosulphonate. Complies with ASTM C494 – 81 Type D & G.

USE
Plastocrete® -905 is suitable for the following works:
Cost effectiveness required for conventional concrete
Where increased workability is required
For mix where cement saving is required
Especially suitable for concrete containing cement replacements such as; PFA (fly ash) or GGBFS (slag)

CHARACTERISTICS AND ADVANTAGES

  • Water reduction up to 16% against control mix
  • Improved utilization of cement
  • Equal strengths to control mix with less cement
  • Better improvement for final strength
  • Compensates for slow early strength gain achieved by cement replacements (PFA,GGBFS)
  • Increased workability and placeability
  • Longer slump retention

PACKAGING
200 litre
1000 litre

Product Data Sheet Plastocrete-905

Material Safety Data Sheet Plastocrete-905

Plastocrete®-907

Mid-Range Water Reducing Concrete Admixture based on Hydrocarboxylic Acid used for concrete with fly ash up to 25% replacement. Complies with ASTM C494 – 81 Type D & G.

USE
Plastocrete® -907 is sutiable for the following works:

  • Use where high strength cost effective concrete is needed
  • Where increased workability is required
  • Mix where cement saving is required
  • Especially suitable for concretes containing cement replacements such as; PFA (fly ash) or GGBFS (slag)

CHARACTERISTICS AND ADVANTAGES

  • Water reduction up to 16% against control mix
  • Improved utilization of cement
  • Equal strengths to control mix with less cement
  • High early strengths
  • Compensates for slow early strength gain achieved by cement replacements (PFA, GGBFS)
  • Increased workability
  • Excellent slump retention

COLOR
Brown
PACKAGING
200 litre
1000 litre

Product Data Sheet Plastocrete-907

Material Safety Data Sheet Plastocrete-907

Plastocrete®-909

Mid-Range Water Reducing Concrete Admixture based on Synthetic Polymer and Modified Lignosulphonate used for concrete with fly ash up to 30% replacement. Complies with ASTM C494 Type D & G.

USE

Plastocrete® -909 is suitable for the following works:

  • High strength cost effective concrete
  • For concrete with extended workability
  • For mix where cement saving is required
  • For concrete containing cement replacements such as; fly ash or slag

CHARACTERISTICS AND ADVANTAGES

  • Water reduction up to 18% against control mix
  • High PFA replacement up to 30%
  • Equal strength to control mix with less cement
  • High early strength
  • Compensates for slow early strength gain achieved by cement replacements (PFA, GGBFS)
  • Increased workability with lower dosages
  • Excellent slump retention

COLOR
Dark Brown
PACKAGING
200 litre
1000 litre

Product Data Sheet Plastocrete-909

Material Safety Data Sheet Plastocrete-909

Plastocrete®-910

Mid-Range Water Reducing Concrete Admixture based on Aqueous blend of refined lignosulfonates, salts and carboxylic acids and additives designed for maximize utilization of low binder content and cost optimization with fly ash 20-35% replacement. Complies with ASTM C494 Type D & G.

USE
Plastocrete® -910 is suitable for the following works:

  • Cost effectiveness for normal concrete
  • Extended workability in high ambient temperature
  • Cement saving is required
  • For conventional concrete containing cement replacements such as; Fly Ash or Slag

CHARACTERISTICS AND ADVANTAGES

  • Water reduction up to 18% against control mix
  • Equal strength to control mix with less cement
  • Better improvement of early and final strength development
  • Compensates for slow early strength gain achieved by cement replacements (PFA, GGBFS)
  • Effectively work with cement replacement (PEA, GGBFS)
  • Increased workability by its plasticized effect
  • Good slump retention in high ambient temperature

COLOR
Dark Brown
PACKAGING
200 litre

Product Data Sheet Plastocrete-910

Material Safety Data Sheet Plastocrete-910

Plastocrete® N

Waterproofing Admixture for Concrete. Complies with ASTM C 494-81 Type A

USE
Plastocrete® N is suitable for waterproofing of masonry and concrete structures such as:

  • Reservoirs and dams
  • Sewerage works
  • Canals
  • Culverts, tunnels
  • Water-tanks, swimming pools
  • Waterproof concrete is required

CHARACTERISTICS AND ADVANTAGES

  • Improved workability without increased water content
  • Allows easier compaction leading to denser concrete and superior finish
  • Increased strength and durability
  • Reduced shrinkage
  • Improved watertightness
  • Increased cohesiveness of mortar
  • Chloride free does not attack reinforcement

COLOR
Brown
PACKAGING
200 litre
1000 litre

Product Data Sheet Plastocrete N

Material Safety Data Sheet Plastocrete N

SikaPlast®-701

Mid-Range Water Reducing Concrete Admixture based on Synthetic Polymer and utilizing polycarboxylate technology used for concrete with fly ash up to 30% replacement. Complies with ASTM C494 – 81 Type A & D.

USE
SikaPlast® -701 is used for the following works:

  • Where increased workability is required
  • Cost effectiveness required for conventional concrete
  • Use in mixes where cement saving is required
  • Especially suitable for concrete containing cement replacements such as PFA (fly ash) or GGBFS (slag)

CHARACTERISTICS AND ADVANTAGES

  • Water reduction up to 11% against control mix
  • Can be used as an economical low dosage admixture for conventional concrete
  • Improved utilization of cement
  • Improved watertightness and durability
  • Equal strengths to control mix with less cement
  • Better improvement for final strength
  • Compensates for slow early strength gain achieved by cement replacements (PFA, GGBFS)
  • Increased workability and finishability
  • Longer slump retention

COLOR
Brown
PACKAGING
200 litre
1000 litre

Product Data Sheet SikaPlast-701

Material Safety Data Sheet SikaPlast-701

SikaPlast®-716TH

Mid-Range Water Reducing Concrete Admixture based on Synthetic Polymer and additives used for concrete with fly ash up to 30% replacement. Complies with ASTM C494 – 81 Type A & D.

USE
SikaPlast® -716TH is used for the following works:

  • Where increased workability is required
  • Cost effectiveness required for conventional concrete
  • Use in mixes where cement saving is required
  • Especially suitable for concrete containing cement replacements such as PFA (fly ash) or GGBFS (slag)

CHARACTERISTICS AND ADVANTAGES

  • Water reduction up to 15% against control mix
  • Improved utilization of cement
  • Improved watertightness
  • Equal strengths to control mix with less cement
  • Better improvement for final strength
  • Compensates for slow early strength gain achieved by cement replacements (PFA, GGBFS)
  • Increased workability and placeability
  • Longer slump retention

COLOR
Light Brown
PACKAGING
200 litre
1000 litre

Product Data Sheet SikaPlast -716TH

Material Safety Data Sheet SikaPlast -716TH

PLASTIMENT® R

Water -Reducing and Retarding Concrete Admixture based on Special Organic Agents. Complies with ASTM C-494 type B & D.

USE
Plastiment® R is used where high quality concrete is required in difficult conditions, such as:

  • Hot climate
  • Long hauls
  • Ready mix concrete
  • Wherever high quality dense concrete is required
  • CHARACTERISTICS AND ADVANTAGES
    Increased setting times at elevated temperatures
    Allows easier compaction leading to denser concrete and superior finish
    Long lasting control of slump loss
    Improved workability without increased water content
    Reduced water without loss of workability
    Increased strengths
    Reduced shrinkage and creep
    Improved watertightness
    Chloride free does not attack reinforcement
    COLOR
    Brown
    PACKAGING
    200 litre
    1000 litre

Product Data Sheet Plastiment R

Material Safety Data Sheet Plastiment R

PLASTOMIX® -704

a newly developed admixture for concrete with mid-range reducing effect. It is concentrated solution based on Synthetic Polymer and Additives.

USE
Plastomix® -704 is used for the following works:

  • Cost effectiveness required for conventional concrete
  • Where increased workability is required
  • Use in mixes where cement saving is required
  • Especially suitable for concrete containing cement replacements such as PFA (fly ash) or GGBFS (slag)

CHARACTERISTICS AND ADVANTAGES

  • Water reduction up to 15% against control mix
  • Improved utilization of cement
  • Equal strengths to control mix with less cement
  • Better improvement for final strength
  • Compensates for slow early strength gain achieved by cement replacements (PFA,GGBFS)
  • Increased workability and placeability
  • Longer slump retention

COLOR
Light Brown
PACKAGING
200 l/drum, 1,000 l/tote or bulk

Product Data Sheet Plastomix 704

Material Safety Data Sheet Plastomix 704

Plastomix®-705

Mid-Range Water Reducing Concrete Admixture based on Synthetic Polymer and additives used for concrete with fly ash up to 30% replacement. Complies with ASTM C494 – 81 Type A & D.

USE
Plastomix® -705 is used for the following works:
Where increased workability is required
Cost effectiveness required for conventional concrete
Mix where cement saving is required
Especially suitable for concrete containing cement replacements such as PFA (fly ash) or GGBFS (slag)

CHARACTERISTICS AND ADVANTAGES

  • Water reduction up to 15% against control mix
  • Improved utilization of cement
  • Equal strengths to control mix with less cement
  • Better improvement for final strength
  • Compensates for slow early strength gain achieved by cement replacements (PFA,GGBFS)
  • Increased workability and placeability
  • Longer slump retention

COLOR
Light Brown
PACKAGING
200 litre
1000 litre

PRODUCT DATA SHEET Plastomix-705

MATERIAL SAFETY DATA SHEET Plastomix-705

Sikament® -520

High Range Water-Reducing and Set Retarding Concrete Admixture for producing free-flowing concrete in hot climates and promoting high early and ultimate strengths. Sikament® 520 has been developed in accordance to ASTM C-494 Type G.

USE
Sikament® -520 is used wherever high quality concrete is demanded under difficult placing and climatical conditions.

CHARACTERISTICS AND ADVANTAGES

  • As a superplasticizer:
  • Substantial improvement in workability without increased water or the risk of segregation. Longlasting control of slump loss. No adverse effect on ultimate strengths.
  • As a water reducer:
  • Early strengths significantly increased
  • High ultimate strengths
  • Up to 30% water reduction
  • Especially suitable for hot climates
  • No excessive air-entertainment
  • No adverse shrinkage effect
  • Improved surface finish
  • Increased watertightness

COLOR
Brown
PACKAGING
200 litre
1000 litre

PRODUCT DATA SHEET Sikament-520

MATERIAL SAFETY DATA SHEET Sikament-520

Sikament® -520N

High Range Water-Reducing and Set Retarding Concrete Admixture for producing free-flowing concrete in hot climates and promoting high early and ultimate strengths. Sikament® 520 has been developed in accordance to ASTM C-494 Type G.

USE
Sikament®-520N is used wherever high quality concrete is demanded under difficult placing and climatical conditions

CHARACTERISTICS AND ADVANTAGES

  • As a superplasticizer:
  • Substantial improvement in workability without increased water or the risk of segregation. Long lasting control of slump loss. No adverse effect on ultimate strengths.
  • As a water reducer:
  • Early strengths significantly increased
  • High ultimate strengths
  • Up to 30% water reduction
  • Especially suitable for hot climates
  • No excessive air-entrainment
  • No adverse shrinkage effect
  • Improved surface finish
  • Increased watertightness
  • Effect for producing free-flowing concrete in hot climates

COLOR
Brown
PACKAGING
200 litre
1000 litre

PRODUCT DATA SHEET Sikament® -520N

MATERIAL SAFETY DATA SHEET Sikament® -520N

Sikament® TP

Initial set and workability extending Superplasticizer and Waterproofing Admixture for concrete. Sikament® TP has been developed in accordance to ASTM C494-81 Type F & G.

USE

  • As a superplasticizer, Sikament ® TP is used to produce high workability concrete for:
  • Slabs and foundations
  • Walls and columns
  • Slender components with densely packed reinforcement
  • Beams and ceilings
  • Water-tanks or swimming pools
  • As a substantial water-reducing agent, Sikament ® TP is used where high early and ultimate strength is required, such as:
  • Prestressed concrete elements
  • Concrete elements manufactured in precast factories where rapid demoulding and early load application is required
  • Bridges and cantilever structures

CHARACTERISTICS AND ADVANTAGES

  • Substantial improvement in workability without increased water
  • Initial set and workability extension in hot climates
  • Accelerated hardening after setting
  • Significant increase of early and ultimate strengths
  • Especially suitable for concreting at elevated temperatures
  • Increased water tightness
  • Improved surface finish
  • Reduced shrinkage and creep
  • Chloride free, does not attack reinforcement
  • Increased resistant to wear and abrasion

COLOR
Brown
PACKAGING
200 litre
1000 litre

PRODUCT DATA SHEET Sikament TP

MATERIAL SAFETY DATA SHEET Sikament TP

Sikament® N550

High Range Water-Reducing and Set Retarding Concrete Admixture based on Blended Polymer for promoting high early and ultimate strengths. Complies with ASTM C-494 Type G.

USE
Sikament® N550 is used wherever high quality concrete is demanded under difficult placing and climatical conditions.

CHARACTERISTICS AND ADVANTAGES

  • As a superplasticizer:
  • Substantial improvement in workability without increased water or the risk of segregation. Long lasting control of slump loss. No adverse effect on ultimate strengths.
  • As a water reducer:
  • Early strengths significantly increased
  • High ultimate strengths
  • Up to 25% water reduction
  • Especially suitable for hot climates
  • No excessive air-entertainment
  • No adverse shrinkage effect
  • Improved surface finish
  • Increased watertightness

COLOR
Brown
PACKAGING
200 litre
1000 litre

PRODUCT DATA SHEET Sikament N550

MATERIAL SAFETY DATA SHEET Sikament N550

Sikament® NN

A highly effective water-reducing agent and superplasticizer based on napthalene technology for promoting accelerated hardening and free flowing concrete.

USE

Sikament® NN as a superplasticizer for flow concrete in :

  • Floor slabs
  • Foundations
  • Slender components with packed reinforcement
  • Walls and columns
  • Beams and ceilings

Sikament® NN as a water-reducer for the manufacture of :

  • Pre-cast concrete elements
  • Bridges and cantilever structures
  • Pre-stressed concrete
  • Area of concrete where formwork must be removed quickly or early loading applied.

CHARACTERISTICS AND ADVANTAGES

Sikament® NN provides the following properties:

  • As a Superplasticizer
  • Substantial improvement in workability without increased water or the risk of segregation. Normal set without retardation, even when over dosed.Improved density and surface finish.
  • As a Water Reducer
  • Up to 35% water reduction. 40% increase in 28 days strengths. High strengths after 8 hours. Increased frost-resistance. Increased water tightness.

COLOR
Brown
PACKAGING
200 L / drum, 1,000 L / tote

PRODUCT DATA SHEET Sikament NN

MATERIAL SAFETY DATA SHEET Sikament NN

Sika® ViscoCrete®-10

Self-Compacting Concrete Admixture based on Sika’s ViscoCrete’ polycarboxylate polymer technology. It meets the requirements for set retarding / high range water reducing superplasticisers according to EN 934 – 2.

USE
Sika® ViscoCrete® -10 is especially suitable for concrete mixes with extended transportation times and extended workability requirements, high water reduction and improved flow characteristics.
Sika® ViscoCrete® -10 is mainly used for the following applications:

  • Concrete with ultra high water reduction (up to 30%)
  • High performance concrete
  • Concrete in hot weather and with extended transportation and workability requirements

CHARACTERISTICS AND ADVANTAGES
Sika® ViscoCrete® -10 is a powerful superplasticiser which acts through several different mechanisms including surface adsorption and sterical effects separating the cementitious binder particles. The following advantageous properties are achieved:

  • High water reduction, resulting in high density, high strength and reduced permeability
  • Superior plasticising effect, resulting in improved flow, placing and compaction characteristics
  • Reduced shrinkage during curing and reduced creep when hardened
  • Sika® ViscoCrete® -10 does not contain chlorides or any other ingredients which promote the corrosion of steel. It is therefore suitable for use in reinforced and prestressed concrete structures.

COLOR
Light Brown
PACKAGING
25 litre
200 litre
1000 litre

PRODUCT DATA SHEET Sika ViscoCrete-10

MATERIAL DATA SHEET Sika ViscoCrete-10

Sika® AER

Air Entraining Concrete Admixture.

USE
Sika® Aer is used to produce easily workable and durable concrete for:

  • Roads
  • Runways and taxi ways
  • Aprons and hard standings
  • Dams and reservoirs
  • Mass concrete structures
  • Freezing concrete

CHARACTERISTICS AND ADVANTAGES

  • Increased frost resistance
  • Improved workability
  • Improved durability
  • Increased cohesion reducing the risk of segregation
  • Reduced water content without loss of workability
  • Unaffected setting time even when overdosed

COLOR

Brown

PACKAGING
25 litre
200 litre

PRODUCT DATA SHEET Sika Aer

MATERIAL SAFETY DATA SHEET Sika Aer

Sikacrete® PP1 (D)

A concrete admixture of the new generation in powder form, based on the Sika Silica Fume Technology.

USE
Sikacrete® PP1 is used in combination with Sikament superplasticizer, the performance characteristics of concrete will be improved and suitable for the following works:

  • Structural concrete
  • Precast processes, and other fields of concrete constructions to increase the density
  • Durability and compressive strength of concrete

CHARACTERISTICS AND ADVANTAGES

  • Increased workability over a longer period of time
  • Green concrete exhibits excellent stability
  • Durability is greatly increased
  • Water permeability of set concrete is much reduced
  • Vapour permeability is much decreased
  • High resistance to carbonation
  • Infiltration of chlorides is very much reduced
  • Very high early and ultimate strengths
  • Reduced deteriortion of migration due to chloride and sulphate reaction

COLOR
Grey
PACKAGING
25 kg bag

PRODUCT DATA SHEET Sikacrete PP1 (D)

MATERIAL SAFETY DATA SHEET Sikacrete PP1 (D)

Sika® FerroGard®-901

Self-Compacting Concrete Admixture based on Sika’s ViscoCrete’ polycarboxylate polymer technology. It meets the requirements for set retarding / high range water reducing superplasticisers according to EN 934 – 2.

USE
Sika® ViscoCrete® -10 is especially suitable for concrete mixes with extended transportation times and extended workability requirements, high water reduction and improved flow characteristics.
Sika® ViscoCrete® -10 is mainly used for the following applications:

  • Concrete with ultra high water reduction (up to 30%)
  • High performance concrete
  • Concrete in hot weather and with extended transportation and workability requirements

CHARACTERISTICS AND ADVANTAGES
Sika® ViscoCrete® -10 is a powerful superplasticiser which acts through several different mechanisms including surface adsorption and sterical effects separating the cementitious binder particles. The following advantageous properties are achieved:

  • High water reduction, resulting in high density, high strength and reduced permeability
  • Superior plasticising effect, resulting in improved flow, placing and compaction characteristics
  • Reduced shrinkage during curing and reduced creep when hardened

Sika® ViscoCrete® -10 does not contain chlorides or any other ingredients which promote the corrosion of steel. It is therefore suitable for use in reinforced and prestressed concrete structures.
COLOR
Light Brown
PACKAGING
25 litre
200 litre
1000 litre

PRODUCT DATA SHEET Sika ViscoCrete-10

MATERIAL SAFETY DATA SHEET Sika ViscoCrete-10

Sika® CNI

A liquid Corrosion Inhibiting Concrete Admixture based on Calcium Nitrite designed to inhibit the corrosion of steel in reinforced concrete.

USE

  • Sika® CNI is recommended for conventional steel reinforcement as well as prestressed or post-tensioned concrete that will be exposed to chlorides from marine environments or deicing salts
  • Sika® CNI will extend the service life of structures by effectively inhibiting corrosion, in areas such as parking garage decks and support structures, bridges decks, marine structures and many others
  • Sika® CNI may also be used in concrete elements where chlorides are added initially to the concrete mix

CHARACTERISTICS AND ADVANTAGES

  • Design to inhibit the corrosion of steel in reinforced concrete
  • Extends the service life of reinforced concrete structures
  • Is recommended for use in all types of reinforced concrete, precast and/or prestressed concrete as well as ready mix applications

COLOR
Green
PACKAGING
200 litre

PRODUCT DATA SHEET Sika CNI

SikaPump®

A universal concrete admixture to improve the pumpability of difficult concrete mixes and protect concrete pumps and pipes from excessive wear.

USE

  • SikaPump® is mainly used for concrete mixes with variable fines, a low cement content or a poor particle size distribution (granulometry) and consequent low water retention capacity i.e. mixes which tend to segregate when pumped and / or create very high pump pressures
  • Even contaminated aggregates (i.e. with dirt and debris) can be pumped without excessive pump pressure by using SikaPump®

CHARACTERISTICS AND ADVANTAGES

  • SikaPump® greatly increases the internal cohesion, plasticity and flexibility of the fresh concrete. This gives a considerable improvement in the workability and particularly the pumping characteristics of concrete mixes. Disjointed, jerky concrete pumping is greatly reduced or prevented and pump efficiency is significantly improved. The stress on the pipes and the concrete pump is reduced with SikaPump® and their life is extended
  • SikaPump® has no negative effects on the hardened concrete properties
  • SikaPump® does not contain chlorides or any other substances that cause reinforcement corrosion and can be used without restriction for reinforced and prestressed concrete structures

COLOR
Pale Green
PACKAGING
200 litre

PRODUCT DATA SHEET SikaPump

MATERIAL SAFETY DATA SHEET SikaPump

Sikaporo®-40

High Dosage Air Entraining and Foaming Agent.

USE
Sikaporo® -40 is an air-entraining agent formulated from modified naturally occurring and synthetic surfactants. Sikaporo® -40 promotes highly air entrained concrete and via a foam generator, foam concrete. It is suitable for the following works:

  • Trench reinstatement
  • Voidfill
  • Lightweight construction

CHARACTERISTICS AND ADVANTAGES

  • Produce highly air entrained mortars or concrete
  • Via a foam gun can produce foamed concrete and mortar as low as 500 kg/metre

COLOR
Clear
PACKAGING
25 litre

PRODUCT DATA SHEET Sikaporo-40

MATERIAL SAFETY DATA SHEET Sikaporo-40

Plastocrete®

Waterproofing Admixture for Concrete. Complies with ASTM C 494-81 Type A

USE
Plastocrete® is suitable for waterproofing of masonry and concrete structures such as:

  • Reservoirs and dams
  • Sewerage works
  • Canals
  • Culverts, tunnels
  • Water-tanks, swimming pools
  • Waterproof concrete is required

CHARACTERISTICS AND ADVANTAGES

  • Improved workability without increased water content
  • Allows easier compaction leading to denser concrete and superior finish
  • Increased strength and durability
  • Reduced shrinkage
  • Improved watertightness
  • Increased cohesiveness of mortar
  • Chloride free does not attack reinforcement

COLOR
Brown
PACKAGING
5 litre gallon, 4 gallons/box, 120 gallons/pallet
25 litre pail, 32 pails/pallet

PRODUCT DATA SHEET Plastocrete

MATERIAL SAFETY DATA SHEET Plastocrete

Aksid Corporation Limited the Certified Prodealer and Applicator of Sika AG is in no way owned, managed or part of Sika Group. This following contents are provided and owned by Sika Group.

For more information about Sika Group, please visit the official website at www.sika.com