Corrosion Inhibitor

SIKA® FERROGARD®-901

A liquid concrete admixture based on Sika® FerroGard® Technology for use in reinforced concrete. It acts as a corrosion inhibitor for the steel reinforcement. By using Sika® FerroGard®-901, the life expectancy and durability will be substantially increased.

USE
Sika® FerroGard®-901 is designed for reinforced concrete particularly at risk of corrosion. It specifically provides protection from chloride induced corrosion. Typical uses are in:

  • Concrete roads
  • Bridges
  • Tunnels
  • Retaining walls
  • Industrial plants
  • Multi storey car parks

CHARACTERISTICS AND ADVANTAGES

  • Corrosion protection for embedded reinforcing steel, especially from chloride attack
  • Protection from the destructive influences of reinforcement corrosion
  • No negative influences on the properties of both the fresh and the hardened concrete
  • It is neutral to hydrogen embrittlement of prestressed steel i.e. it neither enhances nor limits hydrogen embrittlement of prestressing steel

COLOR
Green
PACKAGING
200 litre

PRODUCT DATA SHEET Sika FerroGard-901

MATERIAL SAFETY DATA SHEET Sika FerroGard-901

Sika® FerroGard®-903

A surface applied corrosion inhibitor, designed for use as an impregnation of steel reinforced concrete. Sika® FerroGard®-903 is based on organic and inorganic compounds. Sika® FerroGard®-903 penetrates the concrete and forms a protective mono molecular layer on the surface of the reinforcing steel.

USE
Sika® FerroGard® -903 is a surface applied corrosion inhibitor, designed for use as an impregnation of steel reinforced concrete. It is suitable for the following works:

  • For the corrosion protection of steel reinforced concrete structures above and below ground
  • For repair and maintenance as treatment of (as yet) undamaged reinforced concrete structures where reinforced steel which is corroding, or is in danger of corroding due to the effects of carbonation or chloride attack
  • Sika® Ferrogard®-903 is especially suitable for extending the service life of aesthetically valuable fair-faced concrete surfaces

CHARACTERISTICS AND ADVANTAGES

  • Easy and economical application
  • Does not change the appearance of the concrete structure
  • Does not alter the water vapour diffusion capability
  • Long term protection and durability
  • Can be applied to the surface of existing repairs and surrounding areas to prevent the development of incipient anodes
  • Can be applied where other repair/prevention options are not viable
  • Economic extension of the service life of reinforced concrete structures
  • Penetration depth can be tested on site using the Sika “Qualitative Colour Test” – refer to your local Technical Service Department for details

COLOR
Transparent
PACKAGING
25 kg pail
200 kg drum

PRODUCT DATA SHEET Sika FerroGard-903

MATERIAL SAFETY DATA SHEET Sika FerroGard-903

Aksid Corporation Limited the Certified Prodealer and Applicator of Sika AG is in no way owned, managed or part of Sika Group. This following contents are provided and owned by Sika Group.

For more information about Sika Group, please visit the official website at www.sika.com