Crack Injection

Sikadur® -52TH

2-component, solvent-free, low viscosity injection-liquid, based on high strength epoxy resin.

USE
Sikadur® -52TH is an injection resin for using to fill and seal cavities and cracks in structural components. It is suitable for following works:
Columns
Beams
Foundations
Decks
water-retaining structures

CHARACTERISTICS AND ADVANTAGES

  • A deeply penetrative liquid with high adhesive qualities
  • Low viscosity injection-liquid
  • Solvent free
  • Suitable in both, dry and damp conditions
  • Usable at low temperatures
  • Shrinkage free hardening
  • High mechanical and adhesive strength

COLOR
Yellowish/Transparent
PACKAGING
2 kg set, 144 sets/pallet

PRODUCT DATA SHEET Sikadur-52TH

MATERIAL SAFETY DATA SHEET

Sikadur-52TH(A)

Sikadur-52TH (B)

SikaFix® HH

A High Solids, Expanding, and Flexible Polyurethane Injection Grout.

USE
SikaFix® HH permanently stop unwanted water which is infiltrating through :
Defective concrete such as: cracked, honey-combed

  • Concrete joints
  • Limestone such as: tunnels, dams
  • Pipe intrusions
  • Wastewater tanks
  • Conduits
  • Sewers, manholes, utility boxes and etc.

CHARACTERISTICS AND ADVANTAGES

  • Easy to apply, one component with accelerator
  • Hydrophobic, only a small amount of water needed for reaction
  • Shrinkage
  • Permanently flexible
  • Tenacious adhesion to wet or dry surfaces
  • Safe to environment
  • Bridges wide gaps
  • Applicator controlled reaction time (from 3 secs. to 30 secs)
  • Economical

COLOR
Light amber
PACKAGING
26 kg set

PRODUCT DATA SHEET SikaFix HH

SikaFix®-101

1-component, solvent-free, low viscocity Polyurethane Resin for flexible crack sealing.

USE
SikaFix® 101 is suitable for the following works:

  • To seal leaking live cracks movement joints, pipe intrusion and etc.
  • Suffering from infiltration in tunnels, galleries, basements and concrete below water table
  • To seal and fill defective concrete such as; honeycombed, voide and etc.

CHARACTERISTICS AND ADVANTAGES

  • Low viscosity polyurethane resin for flexible crack sealing
  • Totally water resistance
  • Permanently flexible
  • Solvent free
  • Non flammable
  • Non shrinkage
  • Non toxic in cured form
  • Reacts with salt wate
  • Reacts rapidly
  • Resistant to biological attack and to mind acids, alkalis and etc.

COLOR
White
PACKAGING
20 kg pail

PRODUCT DATA SHEET SikaFix® 101

 

SikaGrout® Pack-1

1-component Silicone Polymer based Temporal Sealant for Low Pressure Injection System.

USE
Sika GroutPack® -1 is temporally fills in the concrete cracks. As a part of SK Group Plug low pressure injection system. It is specially designed for repairing cracks in concrete construction.

CHARACTERISTICS AND ADVANTAGES

  • One component
  • Solvent free and non plasticizing
  • Suitable for indoor application
  • Over-painting after removal of the temporal sealant
  • In combination with Sika GroutPack®-439, clean finish can be obtained

COLOR
Light Grey
PACKAGING
320 ml cartridge

PRODUCT DATA SHEET SikaGrout Pack-1

Equipment for injection

Injection Pump for Sika GroutPlug A and Injection Port for Low Pressure Injection System, enables precise and deep penetration into small cracks.

USE
Sika® SK Pump -4 is the injecting pump that the discharge volume which was stable without what which applies rapid pressure on the syringe tool of Sika GroutPlug® -A and SS can be secured.
Sika GroutPlug® -A is a specially designed resin injection tool for cracks in concrete as a part of Low Pressure Injection System (LPIS).

CHARACTERISTICS AND ADVANTAGES

  • Sika SK Pump-4
  • It is possible to do improvement after use easily (the cleaning uses kerosene).
  • It is a cartridge type, it is possible to do injecting work easily.
  • The material in the pump is easy to see because it is a transparent PVC pipe.
  • The suction quantity and the discharge volume can do capacity management
  • at the piston graduation.

Sika GroutPlug-A

  • Easy viscosity adjustment and refilling of resin
  • Scales on pressure tank help control the injection and pressure amount (please see more in product datasheet)
  • Compact and light weighted.
  • Plug applicator is made of thermoplastic (ABS) and capable of re-shaping to fit the area of application.

PRODUCT DATA SHEET Sika® S K P ump – 4
Sika PDS_E_Sika GroutPlug -A

Sika GroutPlug-A

Aksid Corporation Limited the Certified Prodealer and Applicator of Sika AG is in no way owned, managed or part of Sika Group. This following contents are provided and owned by Sika Group.

For more information about Sika Group, please visit the official website at www.sika.com