Repair Mortars

Sika® Repair Mortar

1-component Repairing and Patching Mortar.

USE
Sika® Repair Mortar is suitable for the following works:
Used to eliminate surface defects caused by demoulding
To fill pores and honeycombs for repair to damaged edges of concrete elements

CHARACTERISTICS AND ADVANTAGES
Easy to apply by trowel Ready to use, requires only the addition of water Rapid setting of 1-2 hrs, depending upon temperature, when used as a thin fairing coat Excellent mechanical properties Subsequent paint coats can be applied with greater economy Non Toxic
COLOR
Grey
PACKAGING
5 kg bucket, 6 buckets/box, 120 buckets/pallet

PRODUCT DATA SHEET Sika Repair Mortar

MATERIAL SAFETY DATA SHEET Sika Repair Mortar

Sika® MonoTop®-412TH

1-component Cement based Polymer Modified Repair Structural Repair Mortar.

USE
Sika® MonoTop® -412 TH is suitable for the following works:

  • Rerestoration; (Principle 3, method 3.1 & 3.3 of EN1504-9), repair of spalling and damaged concrete in buildings, bridges, infrastructure and superstructure works.
  • Structural strengthening; (Principle 4, method 4.4 of EN1504-9), increasing the bearing capacity of the concrete structure by adding mortar
    Preserving or restoring passivity; (Principle 7, method 7.1 and 7.2 of EN 1504-9); increasing cover with additional mortar and replacing contaminated or carbonated concrete
  • Tested application under live dynamic loading

CHARACTERISTICS AND ADVANTAGES

  • Superior workability
  • Suitable for hand and machine application
  • Can be applied up to 50 mm thick per application layer
  • Structural repair
  • Sulphate resistant
  • Very low shrinkage behaviour
  • Does not require a bonding primer even when manually applied
  • Low chloride permeability

COLOR
Grey
PACKAGING
20 kg bag, 60 bags/pallet

PRODUCT DATA SHEET 

MATERIAL SAFETY DATA SHEET Sika MonoTop-412TH

This is a text block. Click the edit button to change this text..

Sika® MonoTop®-614T

1-component Cement based Polymer Modified High Performance Repair Mortar.

USE
Sika® MonoTop® -614T is a suitable for the following works:

  • Concrete repairs, especially for vertical applications
  • Filling / repair mortar for voids, honeycombed areas
  • Repair of spalled concrete caused by reinforcement corrosion
  • Particularly suitable for wet – spray method

CHARACTERISTICS AND ADVANTAGES

  • One component repair mortar
  • To be mixed with water only
  • Excellent workability
  • Adjustable consistency
  • Excellent thixotropic behaviour
  • Good mechanical strengths
  • Excellent frost resistance
  • Applicable in layers up to 50 mm thickness (vertical surface)
  • Non toxic and non corrosive
  • Suitable for wet spray application

COLOR
Grey
PACKAGING
20 kg bag, 60 bags/pallet

PRODUCT DATA SHEET Sika MonoTop-614T

MATERIAL SAFETY DATA SHEET Sika MonoTop-614T

Sika® MonoTop®-615HB

1-component Cement based Polymer Modified High Build Repair Mortar for Overhead.

USE
Sika®MonoTop® -615HB is suitable for the following works:
Fast repairs to overhead, horizontal or vertical concrete or mortar surface
Filling / repair mortar for voids, honeycombed areas and etc.
Repair of spalled concrete caused by reinforcement corrosion

CHARACTERISTICS AND ADVANTAGES

  • Fast and easy to apply to clean
  • Sound substrate in layers up to 50 mm thick, (overhead surface) and 60 mm thick (vertical application)
  • One component system requiring only the addition of clean water
  • Compatible with the thermal expansion properties of concrete
  • Chloride free
  • Non toxice and non corrosive to reinforcing steel
  • Fibre to prevent micro cracking

COLOR
Grey
PACKAGING
20 kg bag, 60 bags/pallet

PRODUCT DATA SHEET Sika MonoTop-615HB

MATERIAL SAFETY DATA SHEET Sika MonoTop-615HB

SikaCrete® Gunite -103

1-component, Unaccelerated, Cementitious Silica-Fume based Gunite Mortar for Concrete Repair

USE
SikaCrete® Gunite -103 is typical applications for dry-spray and suitable for the following works:

  • Concrete repair
  • Levelling of large areas
  • High strength mortar

CHARACTERISTICS AND ADVANTAGES

  • Ready for use and one component material
  • Excellent workability
  • Can be trowelled and screeded after application
  • High density
  • Good adhesion to the substrate
  • Very little rebound
  • Sulphate resistant
  • Excellent resistance to frost and de-icing salts

COLOR
Grey
PACKAGING
25 kg bag, 48 bags/pallet

PRODUCT DATA SHEET SikaCrete Gunite-103

MATERIAL DATA SHEET SikaCrete Gunite-103

SikaCrete® Gunite-133

1-component, Unaccelerated, Cementitious Polymer-Modified Silica-Fume based Gunite Mortar.

USE
SikaCem® Gunite -133 is a high-performance repair mortar for dry-spray application and suitable for the following works:

  • New construction, repairs and maintenance work
  • Concrete, stone and mortar substrates
  • Construction of power stations and penstocks
  • Tunnels and galleries
  • Bridges
  • Industrial and residential buildings

CHARACTERISTICS AND ADVANTAGES

  • Ready for use and one component material
  • Superior workability
  • Can be trowelled and screeded after application
  • Rapid strength development
  • Very high density
  • Highly effective carbonation inhibitor
  • Excellent adhesion to substrate
  • Formulated to minimize dust development
  • Coat thickness up to 50 mm in a single application
  • Extremely economical in use
  • Excellent sulphate resistance

COLOR
Grey
PACKAGING
25 kg bag, 48 bags/pallet

PRODUCT DATA SHEET SikaCrete Gunite-133

MATERIAL SAFETY DATA SHEET SikaCrete Gunite-133

Sikadur®-30

2-part High Strength Structural Epoxy Adhesive for use with Sika® CarboDur® Reinforcement System.

USE
Sikadur® -30 is adhesive for bonding structural reinforcement, particularly in structural strengthening works. Including:

  • Sika® CarboDur® Plates to concrete, brickwork and timber (for details see the Sika® CarboDur® Product Data Sheet)
  • Steel plates to concrete (for details see the relevant Sika® Technical information)

CHARACTERISTICS AND ADVANTAGES

  • Easy to mix and apply
  • No primer needed
  • High creep resistance under permanent load
  • Very good adhesion to concrete, masonry, stonework, steel, castiron, aluminium, timber and Sika® CarboDur® Plates
  • Hardening is not affected by high humidity
  • High strength adhesive
  • Thixotropic: non-sag in vertical and overhead applications
  • Hardens without shrinkage
  • Different coloured components (for mixing control)
  • High initial and ultimate mechanical resistance
  • High abrasion and shock resistance
  • Impermeable to liquids and water vapour

COLOR
Component A: White
Component B: Black
Components A+B mixed: Light Grey
PACKAGING
40 kg unit

PRODUCT DATA SHEET Sikadur-30

Sikadur®-31CF Normal

2-part Epoxy Resin based High Performance Construction Adhesive and Rebar Anchoring.

USE
Sikadur® -31 CF Normal is suitable for the following works:

  • As a structural adhesive and mortar such as; concrete elements, hard natural stone, ceramics, fiber cement, mortar, bricks, masonry, steel, iron, aluminium, wood, polyester, epoxy, glass
  • As a repair mortar and adhesive such as; corners and edges, holes and void filling, vertical and overhead use
  • Joint filling and crack sealing; joint and crack arris/edge repair

CHARACTERISTICS AND ADVANTAGES

  • Easy to mix and apply
  • Suitable for dry and damp concrete surfaces
  • Very good adhesion to most construction materials
  • High strength adhesive
  • Thixotropic: non-sag in vertical and overhead applications
  • Hardens without shrinkage
  • Different coloured components (for mixing control)
  • No primer needed
  • High initial and ultimate mechanical strength
  • Good abrasion resistance
  • Impermeable to liquids and water vapour
  • Good chemical resistance

COLOR
Compoent A: White
Component B: Dark Grey
Component A+B mixed: Concrete Grey
PACKAGING
1 kg set, 12 sets/box, 360 sets/pallet
2 kg set, 12 sets/box, 144 sets/pallet

PRODUCT DATA SHEET Sikadur-31CF Normal

MATERIAL SAFETY DATA SHEET 

Sikadur -31 CF Normal (A)

Sikadur -31 CF Normal (B

Sikadur®-41CF Normal

3-part Thixotropic Epoxy Patching Mortar.

USE
Sikadur® -41 CF Normal is suitable for the follwing works:

  • As repair and bonding mortar such as; concrete elements, hard natural stone, ceramics, fiber cement, mortar, bricks, masonry, steel, iron, aluminium, wood, polyester, epoxy, glass
  • As a repair mortar such as; filling of cavities and voids, vertical and overhead use
  • As an abrasion and impact resistant wearing course
  • Joint filling and crack sealing; joint and crack arris/edge repair

CHARACTERISTICS AND ADVANTAGES

  • Easy to mix and apply
  • Suitable for dry and damp concrete surfaces
  • Very good adhesion to most construction materials
  • High strength
  • Thixotropic: non-sag in vertical and overhead applications
  • Hardens without shrinkage
  • Different coloured components (for mixing control)
  • No primer needed
  • High initial and ultimate mechanical strength
  • Good abrasion resistance
  • Good chemical resistance

COLOR
Compoent A: White
Component B: Dark Grey
Component C: Sand
Component A+B+C mixed: Concrete Grey
PACKAGING
3.67 kg set (A+B+C)

PRODUCT DATA SHEET Sikadur-41CF Normal

MATERIAL SAFETY DATA SHEET 

Sikadur -41 CF Normal (A)

Sikadur -41 CF Normal (B)

Sikadur -41 CF Normal (C)

Sikadur®-43TH

3-part Thixotropic Epoxy Resin Mortar.

USE
Sikadur® -43TH is a high strength material and suitable for the following works:

  • As bedding
  • Underfilling mortar (dry pack)
  • To repair horizontal concrete surfaces such as; as industrial floors,
  • kerbstones, joint arises in highways, bridge decks

CHARACTERISTICS AND ADVANTAGES

  • High mechanical strength
  • Shrinkage-free hardening
  • Solvent-free
  • Curing is not affected by high humidity
  • Suitable for both dry and damp surfaces
  • Rapid hardening
  • Abrasion and impact-resistant
  • Economical

COLOR
Compoent A: Transparent
Component B: Transparent
Component C:Sand
PACKAGING
10 kg set(A+B+C)

PRODUCT DATA SHEET Sikadur 43TH (former Sikadur 743)

MATERIAL SAFETY DATA SHEET 

Sikadur -43 TH (A)

Sikadur -43 TH (B)

Sikadur -43 TH (C)

Sika® Arctic Overlay

Silica-Fume and Fiber-Reinforced, Micro Concrete For Structural Concrete Repair and High Quality Re-Surfacing of Concrete Slabs

USE
Sika® Arctic Overlay is suitable for the following works:

  • Structural repairs ot marine structures, bridges, columns and etc
  • It is also conducive for use in the following repair works where single placing is in excess of 25 mm
  • Bridge columns and beams
  • Jetty piles
  • Concrete piling
  • Spillways
  • Re surfacing of heavily traffict concrete slabs
  • Rehabilitation of concrete slabs prior to industrial flooring installation
  • Sika® Arctic Overlay can be applied with conventional screeder bars and finished of by powerfloat

CHARACTERISTICS AND ADVANTAGES

  • Prebagged at the factory, consistent quality
  • Easy to mix and apply
  • Good workabillity characteristics
  • Suitable for large repairs
  • High ultimate strengths
  • Very dense and durable
  • Non toxic and non corrosive
  • Chloride and iron free
  • Impact and vibration resistant

COLOR
Grey
PACKAGING
25 kg bag, 48 bags/pallet

PRODUCT DATA SHEET Sika Arctic Overlay

MATERIAL SAFETY DATA SHEET Sika Arctic Overlay

Aksid Corporation Limited the Certified Prodealer and Applicator of Sika AG is in no way owned, managed or part of Sika Group. This following contents are provided and owned by Sika Group.

For more information about Sika Group, please visit the official website at www.sika.com