Surface Protection and Impregnations

Sikagard®-680 S

a 1-component methacrylic resin based protective and decorative coating,protects concrete substrates against aggressive atmospheres, moisture ingress and carbonation.

USE
Sikagard® -680S is suitable for the following works:
used to overcoat most mineral substrates including concrete, stone, fibrous cement, suitable brickwork and blockwork.
ideally suited as a final protective coating in concrete repair and building façade refurbishment work.

CHARACTERISTICS AND ADVANTAGES

  • Excellent barrier to carbonation and chloride ions
  • Protective and decorative
  • Highly weather and UV light resistant
  • Water vapour permeable
  • Wide colour range possible in non transparent finisheds
  • Proven worldwide for over 20 years
  • Will not flake or peel if correctly applied
  • Self cleaning
  • Easily applied
  • Resistant to rain approx. 1.5 hours after application
  • Excellent resistance to yellowing and chalking
  • Prevents moisture ingress
  • Easily overcoated; whenever maintenance is required), simply clean down and apply of a refresher coat
  • Slight colour shade differences of concrete can be corrected
  • Can be used as a concrete curing membrane particularly in slip-forming

COLOR
Clear Glaze / Transparent Matt / Top Coat (RAL 9016)
PACKAGING
Clear Glaze and Transparent Matt: 20 kg pail
Top Coat (RAL 9016): 30 kg pail

PRODUCT DATA SHEET Sikagard-680S

Sikagard®-715 W

SIKAGARD®-715 W
A Water based Treatment for removal of moss, lichen, and algae.

USE
Sikagard® -715 is used for the complete removal of moss, lichen, algae and any other similar contamination on all common substrates both inside and outside of buildings such as;

  • Awning
  • Rooftop
  • Gutter
  • Patio
  • Terrace and balcony
  • Wall
  • Floor
  • Wooden
  • Plastic window frame
  • Sunshade
  • Ornamental stonework
  • Gravestone and etc.

CHARACTERISTICS AND ADVANTAGES

  • Water based liquid with excellent cleaning performance on both smooth and porous surfaces
  • Good penetration behaviour and high dispersion power
  • Contains no organic solvents
  • Free of phosphates
  • No release of harmful or irritating vapours (no hazard during interior use)
  • Compatible with most common building materials such as brick, natural stone, concrete, timber, aluminium, steel and plastic materials, rubber or varnished surfaces
  • Does not create any discoloration or stain reaction on these materials

COLOR
Colourless
PACKAGING
500 ml tin, 12 tins/box, 864 tins/pallet
5 litre gallon

PRODUCT DATA SHEET Sikagard-715W

Sikagard®-700 S

1-part Siloxane Based Water Repellent Impregnation for absorbent cementitious substrates. It penetrates well into the open pores of the substrate, providing durable water repellency, while still allowing water vapour diffusion in both directions.

USE
Sikagard®-700 S is used as water repellent and colourless protective surface treatment absorbent exposed materials such as;

  • Concrete in civil engineering or building concrete structures
  • Fibre cement
  • Brickwork (clay and lime sand, non vitrified)
  • Natural stone and etc.
  • Suitable for protection against ingress
  • Suitable for moisture control
  • Suitable for increasing the resistivity

CHARACTERISTICS AND ADVANTAGES

  • Reduction of capillary water absorption
  • Advantages n Reduces efflorescence
  • Reduces dirt penetration into the pores
  • Improves thermal insulation
  • Can be overcoated with solvent based and dispersion coating
  • Higher durability and resistance than conventional silicone based treatments
  • Does usually not change the appearance of the substrate
  • Reduces chloride ion ingress and movement.
  • Does not act as a vapour barrier.

COLOR
Colourless
PACKAGING
3 litre tin, 4 tins/box, 100 cans/pallet
15 litre pail, 10 pails/pallet

PRODUCT DATA SHEET Sikagard-700 S

MATERIAL SAFETY DATA SHEET Sikagard-700 S

Sikagard® ElastoColor -675W

1-part, plasto-elastic water dispersed coating based on styrene acrylate dispersion for the protection and enhancement of fairfaced concrete. Sikagard®-675 W ElastoColor can be applied over existing coatings or directly onto the concrete surfaces. Sikagard®-675 W ElastoColor complies with the requirements of EN 1504-2 as protective coating.

USE
Sikagard®-675 W ElastoColor is used for protection and enhancement of concrete structures (normal and lightweight concrete). It is suitable for the following works:

  • An elastic protective coating on Sika® levelling mortar (refer to your product/ system data sheet), fibre cement and overcoating of existing soundly adhering coatings
  • Suitable for protection against ingress (Principle 1, method 1.3 of EN 1504-9)
  • Suitable for moisture control (Principle 2, method 2.3 of EN 1504-9)
  • Suitable for increasing the resistivity (Principle 8, method 8.3 of EN 1504-9)

CHARACTERISTICS AND ADVANTAGES

  • Easy application
  • Water vapour permeable
  • Very good resistance against weathering and ageing
  • Very good chalking resistance
  • Can be diluted with water
  • High covering power (good opacity)
  • Environmentally friendly (solvent free)
  • Prevents water ingress
  • High diffusion resistance to CO2 (carbon dioxide)

COLOR
Per requested
PACKAGING
15 litre pail

PRODUCT DATA SHEET Sikagard 675 W ElastoColor

SikaTop® Seal-107

2-part, Polymer-Modified, Flexible Cementitious Waterproofing and Protective Slurry Mortar.

USE
SikaTop® Seal-107 is used for:

  • Interior and exterior waterproofing and damp-proofing of concrete, cementitious rendering, brickwork and blockwork
  • Protection of concrete structures against the effects of de-icing salts and freeze-thaw attack
  • Rigid waterproofing of basement walls in new construction and refurbishment
  • Pore / blowhole filling
  • Waterproofing basement and cellars
  • Sealing fine “hairline” cracks in concrete structures (not subject to movement)
  • Levelling mortar for concrete repair works
  • Concrete protection against ingress (Principle 1, method 1.3 of EN 1504-9)
  • Concrete protection for moisture control (Principle 2, method 2.2 of EN 1504-9)
  • Concrete protection for increasing the resistivity (Principle 8, method 8.2 of EN 1504-9)

CHARACTERISTICS AND ADVANTAGES

  • Easy to apply by brush or in thin trowel applications
  • No water required
  • Prebatched components
  • Hand or spray applied
  • Easy and fast mixing
  • Very good adhesion
  • Protects concrete against carbonation
  • Protects against water penetration
  • Non-corrosive to steel or iron
  • Overpaintable
  • Approved for potable water contact
  • Approval/Standards by British Board of Agreement Certificate No. 95/3174

COLOR
Part A: White liquid
Part B: Grey or White powder
Part A+B mixed product: Cement Grey or Off-White
PACKAGING
25 kg set (A+B)

PRODUCT DATA SHEET SikaTop Seal-107

MATERIAL SAFETY DATA SHEET

SikaTop Seal -107 (A)

SikaTop Seal -107 (b)

Aksid Corporation Limited the Certified Prodealer and Applicator of Sika AG is in no way owned, managed or part of Sika Group. This following contents are provided and owned by Sika Group.

For more information about Sika Group, please visit the official website at www.sika.com