Cementitious Flooring

Sika® Leveling Mortar

1-component Floor Toping Compound to pre-level concrete floor in domestic or commercial buildings.

USE
Sika Leveling Mortar is suitable as underlayment in thicknesses from 5 – 9 mm for:

  • Vinyl Tiles
  • Carpet
  • Timber Sport Floors
  • Parquet floors
  • Prefabricated Flooring Systems
  • Roof Membrane

CHARACTERISTICS AND ADVANTAGES

  • Prebagged at the factory – consistent quality
  • Easy to mix
  • Selfsmoothening and highly fluid
  • Suitable for thickness’ ranging from 5 to 9 mm
  • Placeable manually or by pump
  • 18 hours walk on time
  • Non-toxic and non-corrosive
  • Chloride and iron-free
  • Impact and vibration resistant

COLOR
Concrete Grey
PACKAGING
25 kg bag, 48 bags/pallet

PRODUCT DATA SHEET Sika Leveling Mortar

MATERIAL SAFETY DATA SHEET Sika Leveling Mortar

Sikafloor®-81 EpoCem®

3-component, Cementitious, Epoxy-Modified Self-Leveling Floor Topping and Temporary Moisture Barrier.

USE
As a temporary moisture barrier, apply Sikafloor® -81 EpoCem 2 mm thickness prior to the flooring systems
As self smoothing topping, apply Sikafloor® -81 EpoCem 1.5 – 3 mm thickness for:

  • Leveling or patching concrete surfaces, both unfinished and after grinding or planning.
  • EpoCem floors on non-ventilated damp substrates with low esthetic considerations.
  • Levelling layer beneath epoxy floor coatings.
  • Self-levelling toppings as a substrate for synthetic floor coating, carpets, or wooden parquet.
  • Repair and maintenance of monolithic and vacuum concrete floors.
    As a patching and repair mortar for:
  • Surfaces to be coated with epoxy resins.

CHARACTERISTICS AND ADVANTAGES

  • Simple application system
  • Good leveling properties
  • Permeable to water vapour
  • Waterproof
  • Can be overcoated with epoxy resin compounds after 24 hours (20°C, 75 % r.h.)
  • Economical in use and easy to install
  • Frost and de-icing salt resistant
  • Thermal expansion properties similar to concrete
  • Excellent adhesion to damp and green concrete
  • Excellent early and final mechanical strengths
  • Excellent resistance to water and oil
  • Will not corrode reinforcement
  • Pre-dosed sets

COLOR
Light Grey (after mixed)
PACKAGING
Part A+B: 4 kg
Part C: 19 kg

PRODUCT DATA SHEET Sikafloor-81 EpoCem

MATERIAL SAFETY DATA SHEET Sikafloor-81 EpoCem

Aksid Corporation Limited the Certified Prodealer and Applicator of Sika AG is in no way owned, managed or part of Sika Group. This following contents are provided and owned by Sika Group.

For more information about Sika Group, please visit the official website at www.sika.com