Epoxy Primers and Moisture Barriers

SIKAFLOOR®-91/94

3-component solvent free Epoxy Resin based mortar for patching and screeding industrial floors subject to heavy traffic.

USE
Sikafloor® -91 provides non-slip chemical, abrasion and impact resistant epoxy resin floors of 5-40 mm thickness. Sikafloor® -91 has high mechanical strength and provides an ideal floor where heavy loading and wear are encountered, eg. loading docks, workshops, heavy machine shops, warehouses, etc.

CHARACTERISTICS AND ADVANTAGES

  • Easy handling.
  • Solvent free.
  • High bond strength to substrate.
  • High abrasion resistance.
  • High mechanical strengths.
  • Can be power floated.
  • Non-slip finish.
  • Suitable for use on dry and damp substrates.
  • Permeable to water vapour.

COLOR
Aggregate color
PACKAGING
15 kg set

PRODUCT DATA SHEET

Sikafloor-91

Sika PDS_E_Sikafloor -94 Primer

Sikafloor®-156

SIKAFLOOR®-91/94
2-part low viscosity solvent free Epoxy Primer, Levelling Mortar and Mortar Screed.

USE

  • For priming concrete substrates, cement screeds and epoxy mortars
  • For normal to strongly absorbent surfaces
  • Primer for all Sika Epoxy and PUR floorings
  • Binder for levelling mortars and mortar screeds
  • For internal and external use

CHARACTERISTICS AND ADVANTAGES

  • Low viscosity
  • Good penetration ability
  • High bond strength
  • Easy application
  • Short waiting times
  • Multi-purpose
  • For external use also

COLOR
Part A: Transparent
Part B: Brown
PACKAGING
15 kg set

PRODUCT DATA SHEET Sikafloor-156

Sikafloor®-161 HC

2-part low viscosity solvent free Epoxy Primer, Levelling Mortar, Intermidiate Layer, and Mortar Screed (For Sikafloor® 263 SL HC and Sikafloor® 264 HC).

USE
For priming concrete substrates, cement screeds and epoxy mortars
For normal to strong absorbent substrates
Primer for the Sikafloor®-263 SL and Sikafloor®-264 economic flooring systems
Binder for levelling mortars and mortar screeds
Intermediate layer underneath Sikafloor®-263 SL HC and Sikafloor®- 264

CHARACTERISTICS AND ADVANTAGES

  • Low viscosity
  • Good penetration
  • Excellent bond strength even on water saturated concrete
  • Easy application
  • Short waiting times
  • Multi-purpose
  • Proof statement to determine the compatability of coating and water saturated concrete Report-No. P 5688 Polymer Institute, Germany

COLOR
Part A: Brownish-transparent
Part B: Transparent
PACKAGING
Part A: 280 kg drum
Part B: 75 kg drum
Part A+B: 15 kg set

PRODUCT DATA SHEET Sikafloor-161 HC

MATERIAL SAFETY DATA SHEET Sikafloor -161 HC (A)

Sikafloor -161 HC (B)

Sikagard®-75 EpoCem®

3-component Epoxy-Modified Cementitious.

USE
Sikagard® -75 EpoCem® is suitable for the following works:

  • On both vertical and horizontal surfaces of concrete, mortar or stone
  • Can be applied as a thin layer coating
  • 0.5 – 2 mm. thick or as a scraping/ levelling mortar to fill in blow holes,
  • shallow honey combing and other surface irregularities
  • It is ability to provide a temporary moisture barrier provides and ideal substrate for subsequent epoxy coatings

CHARACTERISTICS AND ADVANTAGES

  • Waterproof
  • Permeable to water vapour, allows the substrate to “breath”
  • Excellent adhesion to dry or damp substrates
  • Fast and easy to apply to sound prepared substrates
  • Solvent free and virtually odourless
  • Ideal surface preparation with the minimum of delay for the subsequent application of other appropriate Sika epoxy products.
  • High abrasion resistance
  • Chloride free
  • Similar thermal and elastic properties to concrete
  • Good adhesion after long-term water immersion
  • Suitable for interior or exterior use

COLOR
Part A: White liquid
Part B: Dark grey liquid
Part C: Grey powder
PACKAGING
Part A+B: 4 kg
Part C: 19 kg

PRODUCT DATA SHEET Sikagard® -75 EpoCem

MATERIAL SAFETY DATA SHEET Sikagard® -75 EpoCem

 

Sikafloor®-81 EpoCem®

3-component, Cementitious, Epoxy-Modified Self-Leveling Floor Topping and Temporary Moisture Barrier.

USE
As a temporary moisture barrier, apply Sikafloor® -81 EpoCem 2 mm thickness prior to the flooring systems

  • As self smoothing topping, apply Sikafloor® -81 EpoCem 1.5 – 3 mm thickness for:
  • Leveling or patching concrete surfaces, both unfinished and after grinding or planning.
  • EpoCem floors on non-ventilated damp substrates with low esthetic considerations.
  • Levelling layer beneath epoxy floor coatings.
    Self-levelling toppings as a substrate for synthetic floor coating, carpets, or wooden parquet.
  • Repair and maintenance of monolithic and vacuum concrete floors.
    As a patching and repair mortar for:
  • Surfaces to be coated with epoxy resins.

CHARACTERISTICS AND ADVANTAGES

  • Simple application system
  • Good leveling properties
  • Permeable to water vapour
  • Waterproof
  • Can be overcoated with epoxy resin compounds after 24 hours (20°C, 75 % r.h.)
  • Economical in use and easy to install
  • Frost and de-icing salt resistant
  • Thermal expansion properties similar to concrete
  • Excellent adhesion to damp and green concrete
  • Excellent early and final mechanical strengths
  • Excellent resistance to water and oil
  • Will not corrode reinforcement
  • Pre-dosed sets

COLOR
Light Grey (after mixed)
PACKAGING
Part A+B: 4 kg
Part C: 19 kg

PRODUCT DATA SHEET Sikafloor-81 EpoCem

MATERIAL SAFETY DATA SHEET Sikafloor-81 EpoCem

Aksid Corporation Limited the Certified Prodealer and Applicator of Sika AG is in no way owned, managed or part of Sika Group. This following contents are provided and owned by Sika Group.

For more information about Sika Group, please visit the official website at www.sika.com