EPOXY GROUTS

Sikadur®-42TH

3-component Epoxy Resin Castable Grout.

USE
Sikadur® -42TH is suitable for the following grouting works:

  • Bridge bearing plates
  • Machine bases
  • Fixing bolts and anchors
  • Crane rail tracks
  • Reinforcement
  • And to fill cavities in concrete

CHARACTERISTICS AND ADVANTAGES

  • Good flow characteristics even in thin layers
  • Rapid hardening according to grade used
  • Suitable for both dry and damp surfaces
  • Curing is not affected by high humidity
  • High mechanical strengths
  • Shrinkage free hardening
  • Solvent free
  • Tough vibration-resistant material

COLOR
Component A:Transparent
Component B:Transparent
Component C:Grey

PACKAGING
Pre batch Part A+B+C: 12 kg set

PRODUCT DATA SHEET Sikadur-42TH

MATERIAL SAFETY DATA SHEET

Sikadur -42 TH (A)

Sikadur -42 TH (B)

Sikadur -42 TH (C)

Sikadur®-53

2-part solvent free Moisture Intensive Liquid based on Epoxy Resin to seal damp and wet cracks.

USE
Sikadur® -53 is used as an injectable resin to seal damp and wet cracks by high pressure injection (the width of the cracks must be > 0.5 mm due to the special fillers which would be too thick for thinner cracks). As a grouting liquid or the adhesion of concrete and steel under water (by water displacement).

CHARACTERISTICS AND ADVANTAGES

  • Solvent free
  • Cures without shrinkage
  • High resistance to a wide range of aggressive chemicals
  • Excellent adhesion to salt-water immersed, cementbound substrates
  • High density ensures complete water displacement
  • High mechanical strengths even after hardening under water

COLOR
Part A: Green
Part B: Transparent
Part A+B mixed: Green
PACKAGING
5 kg unit (Part A = 4.445 kg, Part B = 0.555 kg)

PRODUCT DATA SHEET Sikadur-53

Sikadur®-42 MP Slow

3-component, moisture tolerant Epoxy Grouting System (For use at temperatures between +20°C and +40ºC

USE

  • High-strength grouting and fixing of:
  • Starter bars
  • Anchors
  • Fasteners
  • Tie rods
  • Crash barrier posts
  • Fence and railing posts
  • Under-grouting and bedding of:
  • Base plates
  • Machine bases, seat base-plates for light and heavy machinery including heavy impact and vibratory machinery, reciprocating engines, compressors, pumps, presses, etc.
  • Bridge bearings
  • Mechanical joints (i.e. road/bridge/deck types etc.)
  • Sleeper-less, direct rail fixing:
  • Crane tracks
  • Light rail and permanent way in tunnels
  • Light rail and permanent way over bridges

CHARACTERISTICS AND ADVANTAGES

  • High early strength
  • Ready-to-mix, pre-batched units
  • Moisture tolerant
  • Non-shrink
  • Corrosion and chemically resistant
  • Stress and impact resistant
  • High compressive strength
  • High vibration resistance
  • Low coefficient of thermal expansion

COLOR
Component A:Transparent
Component B:Transparent
Component C:Grey
PACKAGING
Pre batch Part A+B+C: 12 kg set

PRODUCT DATA SHEET Sikadur -42 MP Slow

MATERIAL SAFETY DATA SHEET

Sikadur -42 MP Slow (A)

Sikadur -42 MP Slow (B)

Sikadur -42 MP Slow (C)

 

Aksid Corporation Limited the Certified Prodealer and Applicator of Sika AG is in no way owned, managed or part of Sika Group. This following contents are provided and owned by Sika Group.

For more information about Sika Group, please visit the official website at www.sika.com