Anchoring

Sikadur® -52TH

SIKADUR® -52TH
2-component, solvent-free, low viscosity injection-liquid, based on high strength epoxy resin.

USE
Sikadur® -52TH is an injection resin for using to fill and seal cavities and cracks in structural components. It is suitable for following works:

  • Columns
  • Beams
  • Foundations
  • Decks
  • water-retaining structures

CHARACTERISTICS AND ADVANTAGES

  • A deeply penetrative liquid with high adhesive qualities
  • Low viscosity injection-liquid
  • Solvent free
  • Suitable in both, dry and damp conditions
  • Usable at low temperatures
  • Shrinkage free hardening
  • High mechanical and adhesive strength

COLOR
Yellowish/Transparent
PACKAGING
2 kg set, 144 sets/pallet

PRODUCT DATA SHEET Sikadur-52TH

MATERIAL SAFETY DATA SHEET

Sikadur -52 TH (A)

Sikadur -52 TH (B)

Sika® AnchorFix®-1

2-part Solvent and Styrene free Polyester based Fast Curing Anchoring Adhesive.

USE
Sika AnchorFix® -1 is suitable for the following works:

  • As a fast curing anchoring adhesive for all grades of:
  • Rebars/reinforcing steel
  • Threaded rods
  • Bolts and special fastening systems
  • Concrete
  • Hollow and solid masonry
  • Prior to any application, the suitability of the Sika AnchorFix® adhesive for the substrate in terms of the desired bond strength, and for the prevention of surface staining or discolouration, must be confirmed by testing in a sample area. This is due to the wide variation of possible substrates, particularly in terms of strength, composition and porosity:
  • Hard natural stone
  • Solid rock

CHARACTERISTICS AND ADVANTAGES

  • Fast curing
  • Standard guns can be used
  • Can be used at low temperatures
  • High load capacity
  • Non sag, even overhead
  • Solvent and styrene free
  • Low odour
  • Low wastage
  • No transportation restrictions

COLOR
Part A: White
Part B: Black
Part A+B mixed: Light Grey
PACKAGING
300 ml cartridge, 12 cartridges/box, 900 cartridges/pallet

PRODUCT DATA SHEET Sika AnchorFix-1

 

Sika® AnchorFix®-2

2-part Solvent and Styrene free Epoxy Acrylate based High Performance Adhesive Anchoring.

USE
Sika AnchorFix® -2 is suitable for the following works:

  • As a fast curing anchoring adhesive for all grades of:
  • Rebars/reinforcing steel
  • Threaded rods
  • Bolts and special fastening systems
  • Concrete
  • Solid masonry
  • Steel
  • Prior to any application, the suitability of the Sika AnchorFix® adhesive for the substrate in terms of the desired bond strength, and for the prevention of surface staining or discolouration, must be confirmed by testing in a sample area. This is due to the wide variation of possible substrates, particularly in terms of strength, composition and porosity:
  • Hard natural stone
  • Solid rock

CHARACTERISTICS AND ADVANTAGES

  • Fast curing
  • Standard guns can be used
  • High load capacity
  • Non sag, even overhead
  • Styrene-free
  • Low odour
  • Low wastage
  • No transportation restrictions

COLOR
Part A: Light Green
Part B: Black
Part A+B mixed: Light Grey
PACKAGING
300 ml cartridge, 12 cartridges/box, 900 cartridges/pallet

PRODUCT DATA SHEET Sika AnchorFix-2

Sikadur®-31CF Normal

2-part Epoxy Resin based High Performance Construction Adhesive and Rebar Anchoring.

USE
Sikadur® -31 CF Normal is suitable for the following works:

  • As a structural adhesive and mortar such as; concrete elements, hard natural stone, ceramics, fiber cement, mortar, bricks, masonry, steel, iron, aluminium, wood, polyester, epoxy, glass
  • As a repair mortar and adhesive such as; corners and edges, holes and void filling, vertical and overhead use
  • Joint filling and crack sealing; joint and crack arris/edge repair

CHARACTERISTICS AND ADVANTAGES

  • Easy to mix and apply
  • Suitable for dry and damp concrete surfaces
  • Very good adhesion to most construction materials
  • High strength adhesive
  • Thixotropic: non-sag in vertical and overhead applications
  • Hardens without shrinkage
  • Different coloured components (for mixing control)
  • No primer needed
  • High initial and ultimate mechanical strength
  • Good abrasion resistance
  • Impermeable to liquids and water vapour
  • Good chemical resistance

COLOR
Compoent A: White
Component B: Dark Grey
Component A+B mixed: Concrete Grey
PACKAGING
1 kg set, 12 sets/box, 360 sets/pallet
2 kg set, 12 sets/box, 144 sets/pallet

PRODUCT DATA SHEET Sika PDS_E_Sikadur -31 CF Normal (1)

MATERIAL SAFETY DATA SHEET 

Sikadur -31 CF Normal (A)

Sikadur -31 CF Normal (B)

Sikadur®-42TH

3-component Epoxy Resin Castable Grout.

USE
Sikadur® -42TH is suitable for the following grouting works:

  • Bridge bearing plates
  • Machine bases
  • Fixing bolts and anchors
  • Crane rail tracks
  • Reinforcement
  • And to fill cavities in concrete

CHARACTERISTICS AND ADVANTAGES

  • Good flow characteristics even in thin layers
  • Rapid hardening according to grade used
  • Suitable for both dry and damp surfaces
  • Curing is not affected by high humidity
  • High mechanical strengths
  • Shrinkage free hardening
  • Solvent free
  • Tough vibration-resistant material

COLOR
Component A:Transparent
Component B:Transparent
Component C:Grey
PACKAGING
Pre batch Part A+B+C: 12 kg set

PRODUCT DATA SHEET Sikadur -42 TH

MATERIAL SAFETY DATA SHEET

Sikadur -42 TH (A)

Sikadur -42 TH (B)

Sikadur -42 TH (C)

Aksid Corporation Limited the Certified Prodealer and Applicator of Sika AG is in no way owned, managed or part of Sika Group. This following contents are provided and owned by Sika Group.

For more information about Sika Group, please visit the official website at www.sika.com