Types of Problem: Waterproofing
Technical Solution-
Repair with Sika RainTite I
Application Process:
1.Remove dust, loose or friable particles, rust, scale, paint, cement laitance, old coatings to make the substrate sound, clean, homogeneous, free from oils and grease
2.Pre-wet the prepared substrate and keep the surface wet and do not allow to dry.
3.Apply a thin layer of bond coat with Sika Rain Tite I
4.Apply the mortar onto the surface in a layer of max. 20 mm thickness
5.Cover the surface with a polyethylene film, use wet burlap, gunny bag or hessian cloth or water misting for minimum 3–5 days.
Preparation of Bonding Coat
Mixing Ratio: 1:0:2
Preparation of Repair
Packaging: 500 gram,1kg, 5kg, 10kg,20 Kg
DISCLAIMER - "This information is only for educational purposes. All works should be discussed with a qualified civil engineer and all works should be done by a qualified and experienced technician. AKSID takes no responsibility or liability for any works done using these methods or products. "